BPTYP - BLACK STENCIL PAINT 37038
- MSDS: BPTYP
- Manufacturer: FARWEST PAINT MANUFACTURING CO
- Product Name: BLACK STENCIL PAINT 37038
- National Stock Number: 8010-00-285-4917
Product Identification
Product ID:BLACK STENCIL PAINT 37038
MSDS Date:09/27/1989
FSC:8010
NIIN:00-285-4917
MSDS Number: BPTYP
Responsible Party
TUKWILA, WA 98168
US
Emergency Phone: 206-941-1619
Info Phone: 206-244-8844
Cage: 2F266
Contractor
Telephone: 206-244-8844
Cage: 2F266
Ingredients
PIGMENT
Fraction By Weight: 40-45%
VEHICLE, RESIN (VAPOR PRESSURE 2.0 MM HG @ 68F)
Fraction By Weight: 25-30%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
AS FOLLOWS
CAS: 8030-30-6
RTECS: DE3030000
Fraction By Weight: 15-20%
OSHA PEL 250 PPM
ACGIH TLV: 250 PPM
VM&P THINNER
CAS: 64742-89-8
TOLUOL CAS # 108-88-3 (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METAL SOAP DRIERS (36% LEAD DRIER) (VAPOR PRESSURE 2.0 MM
CAS: 301-08-6
Fraction By Weight: <.50%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
Hazards
Health Hazards Acute and Chronic:EYE: SEVERE IRRIT, RED, TEAR, BLURRED
VISION. SKIN: PROLONGED/REPEATED: IRRIT, DEFAT, DERMATITIS. INHAL:
NASAL, RESP IRRIT, DIZZY, WEAK, FATIGUE, NAUSEA, HEADACHE,
UNCONSCIOUSNESS, ASPHYXIATION. INGES T: GI IRRIT, NAUSEA, VOMIT,
DIARRHEA. ASPIRATION OF MAT'L INTO LUNGS CAN CAUSE CHEM PNEUMONITIS
WHICH CAN BE FATAL.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. REMOVE CONTAM CLOTHING. EYES:
FLUSH W/LRG AMT WATER, LIFTING EYELIDS OCCAS, GET MED AID. INGEST:
DONT INDUCE VOMIT. KEEP WARM, QUIET, GET MED AID. ASPIRATION OF
MATERIAL INT O LUNGS DUE TO VOMITING CAN CAUSE CHEM PNEUMONITIS
WHICH CAN BE FATAL. INHAL: REMOVE TO FRESH AIR. IF BREATHING
DIFFICULT, GIVE OXYGEN, IF STOPPED, GIVE ARTIF RESP. KEEP QUIET &
GET MED AID.
Fire Fighting
Flash Point:50.0F,10.0C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
FACPIECE OPERATED IN PRESSURE DEMAND OR OTHER POSITIVE PRESSURE
MODE.
Unusual Fire/Explosion Hazard:NEVER USE NEAR OR AROUND WELDERS OR
CUTTING TORCHES. DRUM (EVEN EMPTY) AND PRODUCT (EVEN JUST RESIDUE)
CAN IGNITE EXPLOSIVELY.
Accidental Release
Spill Release Procedures:SMALL: ABSORB LIQ ON PAPER, VERMIC, FLOOR
ABSORB, ETC. LRG: ELIM IGNIT SOURCES. EVACUATE PERSON W/O PROTECT
EQUIP. STOP SPILL AT SOURCE. DIKE. PUMP LIQ TO SALVAGE TANK. USE
ABSORB ON REMAINING LIQ. PR EVENT RUNOFF TO WATER BODIES. NOTIFY
AUTHORITIES
Neutralizing Agent:N/K IF RUNOFF OCCURS.
Handling
Handling and Storage Precautions:EMPTY CONTAINER MAY BE HAZARDOUS AS
THEY MAY RETAIN PRODUCT RESIDUE. OBSERVE ALL HAZARD PRECAUTIONS
GIVEN IN MSDS.
Exposure Controls
Respiratory Protection:IF ABOVE TLV, NIOSH/MSHA AIR SUPPLIED RESPIRATOR
ADVISED IF W/O ENVIRONMENTAL CONTROL. OSHA REGS ALSO PERMIT OTHER
NIOSH/ MSHA RESPIRATORS UNDER SPECIFIED CONDITIONS. SEE SFTY EQUIP
SPPLR. IMPLEMENT E NGINEERING/ADMIN CONTROL TO REDUCE EXPOS
Ventilation:PROVIDE MECHANICAL (GENERAL/LOCAL) VENT TO MAINTAIN
EXPOSURE BELOW TLV(S).
Protective Gloves:RESISTANT GLOVES SUCH AS NITRILE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:TO PREVENT REPEATED/PROLONGED SKIN CONTACT.
WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:KEEP WORK AREA CLEAN & FREE FROM LEAKS &
SPILLS. ALWAYS WASH HANDS W/SOAP & WATER BEFORE HANDLING FOOD &
DRINK.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:190F,88C
Vapor Density:> AIR
Spec Gravity:11.60 LBS/GAL
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:BLACK MEDIUM VISCOUS LIQUID WITH A MILD SWEET
AROMATIC ODOR.
Percent Volatiles by Volume:<50
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM OPEN FLAMES, SPARKS, AND
HEAT. DO NOT WELD NEAR OR AROUND PRODUCTS.
Disposal
Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBENT MAY BE DEPOSITED IN A LANDFILL IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.